Cabinet Specifications
Standard Kitchen and Bathroom Materials and Construction
Case
- Face frames are solid ¾” thick with 1 ½” stiles and rails. Mortise and tenon joints.
- Sides are birch veneered ½” plywood. The interior features a clear-coat finish and the exterior is stained to match the door.
- Shelves are 5/8” thick birch veneered plywood sealed with a clear-coat, adjustable and front edge banded.
- For ease of installation, backs are framed with a 1/2” plywood hanging rail. Base cabinet backs extend to the floor providing optimal structural stability.
Drawers
- 5/8” thick solid hard wood, dovetailed joints and clear-coated.
- Bottoms are ¼” birch plywood fully captured.
- Slides are under mounted full-extension soft close.
- Drawer fronts are full overlay 5 piece construction.
Doors
- Mortise and Tenon
- Shaker is a full overlay birch door with 2¼” stiles and rails. The panel is ¼”.
- Lenox is a birch full overlay applied moulding door with 2 ¼” stiles and rails. The raised center panel is solid wood.
- Bridgewater is a birch full overlay applied moulding door with 2 5/8″ stiles and rails. The raised center panel is solid wood.
Finish
- Valspar standard formulations are used.
- Catalyzed conversion varnish top coat with UV protection is applied to doors, drawers and face frames.
- Glazing is applied to the doors and drawer fronts.
Hinges
- Hinges are 6-way adjustable.
Species
